COLO-3212 Pass Through Powder Coating Booth for Manual Plant

COLO-3212 Powder booth is designed for pass through type manual powder coating. Parts held by conveyor hangers enter the booth through the opening, and pass the dual operating stations to obtain the powder coating from both sides, and then exit from the other opening. This powder booth is specially deisgned for manual continuous productions, suitable for apllications such as furniture products, door & window frames, LPG tank, fire extinguisher, etc

COLO-3212 Pass Through Powder Coating Booth Benefits

1. Parts are passed thru the spray booth by hanging on the overhead conveyor, the conveyor could be supplied by COLO or produced by customer themselves.

2. Two manual powder coating stations for staff to coat workparts from both sides. increase working efficiency.

3. Four pieces high precision filter cartridges, high powder recovery rate, quick release type for fast color change.

4. Oversprayed powders are entered within the air stream moving to the recovery stage, where the cartridge filters will remove the particulate, ensures only clean air exhausted.

5. The powder spray booth material adopts 1.2mm cold plate with powder coated surface, durable and long lifespan.

COLO-3212 Powder Coating Booth Components

100% Polyester filters
Size: D325xH900mm per piece. Colo's powder booths uses only the highest quality filters made from 100% polyester, whose filtration less than 0.1 micrometer, well separates the powder from the air. Each filter will get interval pulse-jet cleaning controlled by valves, which will extend its life.

Fans
In Booths manufactured by Colo we use aluminium fans which are safe, doesn't cause sparks when rubbing by metal elements which in case of using metal fan can cause explode.And they are very quiet, work at the level of 74-79dB.  Fan is installed at the top of filter room that saves factory space

PLC Control unit
Colo’s control unit have many program. Different bottom correspondence different function. Control the fan on/off, adjust time range of the pulse to cleaning filters, make the recovery powder hopper up and down.

Powder Collector
There is a powder recovery hopper beneath the booth that collects oversprayed powders, which can be taken away to fully empty thus increase powder recovery.

Pass Through Powder Coating Booth Specifications

COLO Manual & Automatic Powder Coating Booth Selections

• COLO-1115 Small Powder Coating Booth
• COLO-1517 Manual Powder Coating Booth
• COLO-2315 Batch Powder Coating Booth

• COLO-2152 Manual Pass Thru Powder Coating Booth
• COLO-0825 Automatic in-line Powder Coating Booth
• PP Anti-static Powder Coating Cyclone Booth