COLO-800D Automatic Powder Coating Equipment

COLO-2000D Powder Coating Reciprocator

1.The COLO-2000D reciprocator is one of the most reliable choice automatic coating line. Driven by frequency motor, the reciprocator carries spray guns to move up and down in programmed stroke and speed, 

2.The construction and performance are designed to high continual load for everyday operational conditions

3.The stroke can be customized, within the stroke, the spray gun travel range of the upper and lower limited position can be arbitrarily set to optimize the coating jobs.

4.Smooth, stable and accurate motion ensures uniform powder film thickness and reduces powder waste.

5.User-friendly digital controller allows quick job change, 80 kinds of programm presettings and storages.

Cyclone Recovery Automatic Powder Coating Booth

1.It is designed with automatic coating stations for the reciprocators and manual station for repair coating. 

2. Configures cyclone reccovery system which is necessary for high efficiency recovery or fast color change demands. Most quality powders are recycled in the cyclone unit, while after filter unit is to capture superfine powder particles ensure the vented air is clean. 

3.The automatic powder coating booth is made of coated cold-rolled steel which is durable and economical. You can also choose PP plastic made spray booth featuring anti-static, such booth does not attract powders and maximize cleaning efficiency during color change.

4.Booth floor is designed with air knife self-cleaning system, effectively transfer sprayed powder from the booth floor to recycling system, increase powder utilization

COLO Automatic Powder Feed Center

1.Powder feed center is designed for continuously, uniformly, quantificationally feed the powder to the spray gun, a space-saving and efficient solution for all your powder management.

2.A sieving unit connected with booth recovery system for automatic sieving of recycled powders, as well as dissolving and loosening of powder accumulations for even powder flow, ensures powder application purity.

3.It is exclusively that allows automatic cleaning of spray guns, powder pipes, powder pumps increase efficiency especially in frequent color change line.

4.Configures a high volume powder hopper supports for continuous big productions, and can be moved out for easy cleaning.

5.PLC touch screen allows integrated control of powder center, spray booth, guns & reciprocators, curing oven.

Trolley Type Powder Coating Batch Oven

1.Trolley type powder coating curing oven is designed for batch operations. Workparts are manually carried on the trolley, the whole system will be pushed into the chamber for curing process via pre-set time and temperature on PLC controller.

2.COLO curing oven designed with powerful air circulation fans to create optimal airflow throughout the enclosure, providing an even, constant cure for your parts.

3.The gas heating tunnel uses Riello gas burner to rapidly and uniformly raise to requirement temperature, save your time everyday, and features environmental friendly, diesel heating also available.

4.Our power curing oven consists of 100 mm thickness rockwool board as insulating layer, inserted between durable galvanized wall and steel skin, always keeps the chamber a consistent high temperature with minimum heat loss.