Powder Coating Pretreatment - Spray Washing Tunnel

1.The spraying wash type powder coating pretreatment is by using many spraying nozzles and circulation pump to spray chemicals onto the processed objects to prepare clean, adhesive surfaces.

2.This process is suitable for high production capacity requirement in a fully automatic powder coating line. 

3.The spraying tunnel is fabricated by using Stainless Steel, there for the investment is relatively high.

4.The processing of a basic spraying wash system mainly include degrease, conditioning, phosphate, rinse. Actual stages should be decided and built according to customer's products.

COLO-191S Professional Automatic Coating Equipment

1. The COLO-191S controller applies digital valve technology offering great accuracy and flexibility to set processing parameters, which is ideal for coating complex parts and easy penetration of deep corners

2. The precise powder output control improves the film thickness consistency and features great powder savings. 

3. Combine powerful 100kv spray guns with delivers highest transfer efficiency and maintain stable performance during long time work.

4. This model offers 3 pre-set application programs and 20 personalized programs, optimize coating quality for different parts and powders, greatly useful for both beginners and specialists.

5. Multi controllers of automatic powder coating gun installed on a central cabinet for simple operation. All units can be integrated controlled through a host unit.

COLO-2000D Powder Coating Reciprocator

1.The COLO-2000D reciprocator is one of the most reliable choice automatic coating line. Driven by frequency motor, the reciprocator carries spray guns to move up and down in programmed stroke and speed, 

2.The construction and performance are designed to high continual load for everyday operational conditions

3.The stroke can be customized, within the stroke, the spray gun travel range of the upper and lower limited position can be arbitrarily set to optimize the coating jobs.

4.Smooth, stable and accurate motion ensures uniform powder film thickness and reduces powder waste.

5.User-friendly digital controller allows quick job change, 80 kinds of programm presettings and storages.

PP Anti-static Automatic Powder Coating Booth with Cyclone

1.It is designed with automatic coating stations for the reciprocators and manual station for repair coating. 

2. Configues cyclone reccovery which is necessary for high efficiency recovery or fast color change demands, as well as after filter unit to capture superfine powder particles ensuring the vented air is dustfree in the workshop.

3.The automatic powder coating booth is constructed with pp plastic booth chamber. As the booth wall is made of anti-static plastic it does not attract powders which minimizes powder accumulation on the surface. It is the best choice for quick color change and high powder recovery demands.

4.Booth floor is designed with air knife and flap system for self-cleaning, effectively transfer sprayed powder from the booth floor to recycling system, increase powder utilization

Automatic Powder Feed Center

1.Powder feed center is designed for continuously, uniformly, quantificationally feed the powder to the spray gun, a space-saving and efficient solution for all your powder management.

2.A sieving unit connected with booth recovery system for automatic sieving of recycled powders, as well as dissolving and loosening of powder accumulations for even powder flow, ensures powder application purity.

3.It is exclusively that allows automatic cleaning of spray guns, powder pipes, powder pumps increase efficiency especially in frequent color change line.

4.Configures a 160L high volume powder hopper supports for continuous big productions, and can be moved out for easy cleaning.

5.PLC touch screen allows integrated control of powder center, spray booth, guns & reciprocators, curing oven.

Continuous Powder Curing Tunnel

1.Powder Coating Curing Tunnel is designed for continuous operations. Workparts automatically enter the oven and move by overhead conveyor, when they come out from the exit of the oven, they finish the curing process in a fitted time

2.COLO curing tunnel designed with air circulation fans to create optimal airflow throughout the enclosure, providing an even, constant cure for your parts.

3.The gas heating tunnel uses Riello gas burner to rapidly and uniformly raise to requirement temperature, save your time everyday, and features environmental friendly, diesel heating also available.

4.Our curing tunnel oven consists of 100 mm thickness rockwool board as insulating layer, inserted between durable galvanized wall and steel skin, always keeps the chamber a consistent high temperature with minimum heat loss.